The Lighting Site
HomeAbout UsContactTestimonialsLinksOrdering and DeliveryReturns PolicyTerms and Conditions
Retail and Exhibition LightingCommercial and Domestic LightingExterior and Garden Lighting

 

Hunza Uplighting
Handcrafted in New Zealand

It's never seen in nature, so its unusual effect demands attention.
Uplighting is dramatic and usually reserved for highlighting focal points.

 


NPS Spot
NPS
Hunza NPS Spot
CLICK TO ENLARGE

Prices from £62.00
exc. VAT
Go to Hunza Price List

The "NPS Spot" refers to the head of the luminaire only. It is designed to be fitting to either a Hunza® Super Spike, to secure in sandy soil for uplighting bushes, or a Hunza® Tree Mount Adaptor Kit to create a moonlighting effect.

It has a fully adjustable head allowing 360 degree rotation and 0 - 90 degree elevation.

Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

Suitable for use with an MR16 - 20, 35 or 50 watt lamp and is supplied with a 20 watt high quality European lamp.

There are now 2 LED options available for this fixture: retrofit LED lamps or Pure Integrated LED.

The HUNZA PURE integrated LED system contains a 6 watt Cree high-output chip. A remote 12v LED driver will also be required.
For further information see the HUNZA PURE LED Information Page.

Retrofit MR16 GU5.3 LED lamps can also be used with this fitting. These are available at 3watt and 6watts with a choice of beam angles and colour temperatures. A remote transformer will be required.

A GU10 version of this luminaire is also available for mains voltage GU10 Halogen or GU10 LED lamps. No transformer or driver will be required – please call for further information

Click here to download Specification Sheet for NPS Spot

Click here for application example     Example 1    Example 2


Spike Spot
SS
Hunza Spike Spot
CLICK TO ENLARGE

Prices from £66.00
exc. VAT
Go to Hunza Price List

The Spike Spot has been designed for easy insertion into the ground via a 145mm spike, for uplighting bushes and small trees. This luminaire has a fixed head, but could be easily inserted into the ground at an angle if required.

Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

Suitable for use with an MR16 - 20, 35, or 50 watt lamp and is supplied with a 20 watt high quality European lamp.

This low voltage fitting is suitable for use and supplied with a MR16 - 20 watt (max) high quality European 5000 hour lamp.

Click here to download Specification Sheet for Spike Spot

Click here for application example     Example 1    


Spike Spot Adjustable
SS/A
Hunza Spike Spot Adjustable
CLICK TO ENLARGE

Prices from £77.00
exc. VAT
Go to Hunza Price List

The Adjustable Spike Spot is a versatile garden lighting product easily inserted into the ground via a 145mm spike for uplighting bushes, small trees, statues and planters etc.

This luminaire has a fully adjustable head allowing 360 degree rotation and 0 - 90 degree elevation.

Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green ,matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

This low voltage fitting is suitable for use with an MR16 - 20, 35 or 50 watt lamp and is supplied with a high quality 20 watt European lamp.

Click here to download Specification Sheet for Spike Spot Adjustable

Click here for application example     Example 1    Example 2


Twin Bar Lite
TBL
Hunza Twin Bar Lite
CLICK TO ENLARGE

Prices from £138.00
exc. VAT
Go to Hunza Price List

Two individual spotlights which can be aimed in two entirely different directions. Each lite has fully adjustable arms allowing 360 degree rotation. An ideal use of the Twin Bar Lite is for wall or sign illumination using 2 x 20 watt lamps with an IG40 transformer for best economy.

Machined from 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or solid copper or 316 stainless steel, clear tempered glass lenses with high temperature silicon gaskets. The heads are mounted on a 250mm bar with twin ground spikes.

Suitable for use with MR16 - 20, 35 or 50 watt lamps and is supplied with high quality European 5000 hour lamps.

Click here to download Specification Sheet for Twin Bar Lite

Click here for application example     Example 1    


Pole Spot
PS
Hunza Pole Spot
CLICK TO ENLARGE

Prices from £102.00
exc. VAT
Go to Hunza Price List

The Pole Spot has a single spotlight which can be aimed in any single direction. The fitting has an adjustable head making this luminaire deal for path lighting as well as lighting trees.

This low voltage fitting is suitable for use and supplied with a MR16 - 20 watt high quality European lamp.

Click here to download Specification Sheet for Pole Spot

Driveway Lite
DWL

HUnza Driveway Lite
CLICK TO ENLARGE

Prices from £186.00
exc. VAT
Go to Hunza Price List

A luminaire designed to mount flush with the level of the driveway, pathway, hotel floors or building foyers - there is no lip to trip over.

The Driveway Lite is supplied with a mounting canister that facilitates ease of installation. The luminaire can be driven over or walked upon without damaging it.

Designed so the lamp can be directed up at a bush, tree, or the outside of a building, etc. without the need to remove the fitting from the canister due to the three vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire.

This luminaire has a solid bronze or 316 stainless steel flange with a powder coated black body.This luminaire has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens. Solidly constructed body cast from aluminium with UV stable powder coat, with a ‘Flush Fit’ 10mm thick tempered glass lens and silicon gasket. The lamp can be aimed up to 20 degrees without removing the fitting from the canister.

Suitable for use with MR16 - 20, 35 or 50 watt lamp and is supplied with a high quality 20 watt European lamp.

Click here to download Specification Sheet for Driveway Lite

Click here for application example     Example 1    


Inground 1-11
IG1-11

HUnza Inground 1-11

CLICK TO ENLARGE

Prices from £318.00
exc. VAT
Go to Hunza Price List

 

To be Discontinued
and replaced with

High Power LED ST100

Watch this space

This luminaire is ideal for lighting large trees, palms, columns and buildings, etc. The Inground 1-11 is a flush fitting canister mount 240 volt inground up lighter designed to suit the AR1-11 lamp.

The Inground 1-11 is suitable for use with 50, 75 and 100 watt lamps which have a range of beam angles from 4 to 45 degrees and is complete with its own 240 volt a.c integral power supply and thermal overload, and it is dimmable.

The luminaire can be driven over (10km max) or walked upon without damaging it and it has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens. The Inground 1-11 is supplied with a mounting canister that facilitates ease of installation which also allows flush mounting with the level of the ground, driveway, pathway, hotel floors or building foyers there is no lip to trip over.

Designed so the lamp can be directed (up to 20 degrees) without the need to remove the luminaire from the canister due to the four vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire. Solidly constructed from a cast aluminium UV stable powder coated body, with heat dissipation fins to lower operating temperature, with a 10mm thick ‘Flush Fit’ tempered glass lens and silicon gasket.

This fitting has a solid bronze or 316 stainless steel flange with a powder coated black body. Suitable for use with AR1-11 - 50 watt, 75 watt or 100 watt lamp and is supplied with a high quality European lamp.

Click here to download Specification Sheet for Inground 1-11

Click here for application example     Example 1    


Inground 1-11GM
IG11GM

HUnza Inground 1-11GM

CLICK TO ENLARGE

Prices from £353.00
exc. VAT
Go to Hunza Price List

 

To be Discontinued
and replaced with

High Power LED ST100

Watch this space

The Inground 1-11gm having no protruding parts, it is ideal for driveway lighting, path lighting, uplighting bushes and small tress. Alternatively, it could also be used in hotels or building foyers. This luminaire can be safely driven over (10km max) or walked upon without fear of damage.

It has a fully adjustable gimble suitable for use with 50 and 75 watt MR16 lamps and is complete with a hex cell louvre and space to mount coloured or lineal spread lenses.

Designed so the lamp can be directed up to 45 degrees, without the need to remove the fitting from the canister, and having a three vandal-resistant Allen-head screw fixing system that attach the flange to the body of the luminaire, this is a invaluable luminaire for any exterior lighting project.

This luminaire is supplied with a high quality 20 watt European lamp.

It also come complete with its own dimmable 240 volt a.c integral transformer and thermal overload and has a “Flush Fit” lens which stops water pooling and depositing dirt and a mounting canister that facilitates ease of installation.

Solidly constructed from a cast aluminium UV stable powder coated body, with a 10mm thick ‘Flush Fit’ tempered glass lens and silicon gasket and either a solid bronze or 316 stainless steel flange.

Click here to download Specification Sheet for Inground 1-11GM

Click here for application example     Example 1    


Inground 1-11/12
IG111/12

Hunza Inground 1-11/12
CLICK TO ENLARGE

Prices from £232.00
exc. VAT
Go to Hunza Price List

To be Discontinued
and replaced with

High Power LED ST100

Watch this space

 

The Inground 1-11 is a flush fitting canister mount, this uplighter designed to suit the AR1-11 lamp, making it ideal for uplighting large trees, columns and buildings, etc. Having no protruding parts, it is also ideal for driveway lighting, path lighting and also in hotels or building foyers. This luminaire can be safely driven over (10km max) or walked upon without fear of damage.

Designed so the lamp can be directed up to 20 degrees, without the need to remove the fitting from the canister, and having a the three vandal-resistant Allen-head screw fixing system that attach the flange to the body of the luminaire, this is a invaluable luminaire for any exterior lighting project.

This low voltage luminaire is suitable for use with standard AR1-11 50, 75 and 100 watt lamps which have a range of beam angles from 4 to 45 degrees. However it is supplied with a high quality 60 watt IRC (equivalent output as a standard 100 watt) European 3000 hour lamp. It also come complete with it a “Flush Fit” lens which stops water pooling and depositing dirt and a mounting canister that facilitates ease of installation.

Solidly constructed from a cast aluminium UV stable powder coated body, with a 10mm thick ‘Flush Fit’ tempered glass lens and silicon gasket and either a solid bronze or 316 stainless steel flange.

Unlike the standard IG1-11, a remote transformer will be required for this inground uplighter

Click here to download Specification Sheet for Inground 1-11/12


Inground 1-11/12GM
IG111(12)GM

Hunza Inground 1-11/12GM

CLICK TO ENLARGE

Prices from £301.00
exc. VAT
Go to Hunza Price List

 

To be Discontinued
and replaced with

High Power LED ST100

Watch this space

The Inground 111gm12 having no protruding parts, it is ideal for driveway lighting, path lighting, uplighting bushes and small tress. Alternatively, it could also be used in hotels or building foyers. This luminaire can be safely driven over (10km max) or walked upon without fear of damage.

It has a fully adjustable gimble suitable for use with 50 and 75 watt MR16 lamps and is complete with a hex cell louvre and space to mount coloured or lineal spread lenses.

Designed so the lamp can be directed up to 45 degrees, without the need to remove the fitting from the canister, and having a the three vandal-resistant Allen-head screw fixing system that attach the flange to the body of the luminaire, this is a invaluable luminaire for any exterior lighting project.

This low voltage luminaire is suitable for use with a 50 watt MR16 lamp it is supplied with a high quality 20 watt European lamp.

Solidly constructed from a cast aluminium UV stable powder coated body, with a 10mm thick ‘Flush Fit’ tempered glass lens and silicon gasket and either a solid bronze or 316 stainless steel flange.

Unlike the standard IG111gm, a remote transformer will be required for this inground uplighter

Click here to download Specification Sheet for Inground 1-11/12GM


Lawn Lite
LL

Hunza Lawn Lite

CLICK TO ENLARGE

Prices from £131.00
exc. VAT
Go to Hunza Price List

 

The Lawn Lite is designed for insertion into a lawn or garden bed and can be mowed over without damaging it.

Designed so the lamp can be directed up to 20 degrees at a bush , tree, or the outside of a building, etc. without the need to remove the luminaire from the ground or deck due to the three vandal-resistant allen head screw fixing system which attaches the flange to the body of the luminaire.

The Lawn Lite has a “Flush Fit” lens which stops water pooling and depositing dirt on the lens. It is solidly constructed from cast aluminium with either a UV stable powder coated finish (standard colours bronze, green, matt black and silver) or with a solid bronze or 316 stainless steel flange and powder coated black body. It has a 10mm thick ‘Flush Fit’ tempered glass lens and a silicon gasket.

Suitable for use with an MR16 - 20 ,35 or 50 watt lamp and is supplied with a high quality 20 watt European lamp.

Click here to download Specification Sheet for Lawn Lite

Click here for application example     Example 1    Example 2


Lawn Lite
Deck Mount
LL/DMV

HUnza Lawn Lite Deck Mount
CLICK TO ENLARGE

Prices from £193.00
exc. VAT
Go to Hunza Price List

The Lawn Lite Deck Mount version is designed to be mounted into timber decks.

The lamp can be directed up to 20 degrees at a bush, tree, or the outside of a building etc. without the need to remove the luminaire from the deck due to the three vandal-resistant 316 stainless steel allen head screw fixing system which attaches the flange to the body of the luminaire and has a solid bronze or 316 stainless steel flange with a powder coated black body.

This luminaire has a ‘Flush Fit’ lens which stops water pooling and depositing dirt on the lens. It is solidly constructed from cast aluminium witha UV stable powder coated finish black body with a solid bronze or 316 stainless steel flange. It has a10mm thick ‘Flush Fit’ tempered glass lens and a silicon gasket.

Note: Deck Lite is not suitable for driving over.

Suitable for use with an MR16 - 20 , 35 or 50 watt lamp and is supplied with a high quality 20 watt European lamp.

Click here to download Specification Sheet for Lawn Lite Deck Mount

Click here for application example     Example 1  


Floor Lite
FL

Hunza Floor Lite
CLICK TO ENLARGE

Prices from £170.00
exc. VAT
Go to Hunza Price List

The Floor Lite has an 88mm flange which has an extremely low profile (3mm) and can be walked upon without damaging the luminaire. Although extremely robust, these luminaires are not designed to be driven over.

There are five flange designs:  A) Clover #CL   B) Grill #GR   C) Louvre #LU (45 degree angle)
D) Spot #SP    E) Cross #CR

The luminaire is held into the aluminium mounting canister by two 'O' rings that allows the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire.

The Floor Lite is machined from 9mm thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets. This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp.

A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP56 rating. Suitable for use with a MR16 - 20 watt and is supplied with a high quality European 5000 hour lamp.

Click here to download Specification Sheet for Floor Lite

Floor Lite Square
FL-SQ

Hunza Floor Lite Square
CLICK TO ENLARGE

Prices from £196.00
exc. VAT
Go to Hunza Price List

The Floor Lite Square has an 88mm x 88mm flange which has a low 7mm profile and can be walked upon without damaging the luminaire. Although extremely robust, these luminaires are not designed to be driven over.

There are five flange designs:  A) Clover #CL   B) Grill #GR   C) Louvre #LU (45 degree angle)
D) Spot #SP    E) Cross #CR

The luminaire is held into the aluminium mounting canister by two 'O' rings that allows the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire.

The Floor Lite is machined from 9mm thick 316 stainless steel and has a tempered glass lens with high temperature silicon gaskets. This luminaire is complete with an aluminium mounting canister, and is supplied with a 20 watt lamp to avoid undue heat generated by the lamp.

A 5 watt self ballasted 240 volt fluorescent option is available which offers excellent light output, low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP56 rating. Suitable for use with a MR16 - 20 watt and is supplied with a high quality European 5000 hour lamp.

Click here to download Specification Sheet for Floor Lite Square

Floor Lite Dark Lighter
FLDK

Hunza Floor Lite Dark Lighter

CLICK TO ENLARGE

Flange designs as p
er
standard Floor Lites below


Prices from £286
exc. VAT
Go to Hunza Price List

The Floor Lite Dark Lighter has a lamp that is recessed 50mm down in to the body of the luminaire, along with a hex cell louvre and a matt black interior the luminaire has superior glare control. These luminaires can be walked over without fear of damage, (although extremely robust, these luminaires are not designed to be driven over)

There are five flange designs:  A) Clover #CL   B) Grill #GR   C) Louvre #LU (45 degree angle)
D) Spot #SP    E) Cross #CR

The luminaire is held into the aluminium mounting canister by two 'O' rings that allows the luminaire to be removed for lamp replacement, hence there are no mounting screws in the flange to spoil the aesthetics of the luminaire. This luminaire comes complete with an aluminium mounting canister.

This low voltage fitting is suitable for use and supplied with a MR16 - 20 watt (max) high quality European 5000 hour lamp.

Click here to download Specification Sheet for Floor Lite Dark Lighter

Flush Floor Lite
FFL
Hunza Flush Floor Lite
CLICK TO ENLARGE

Prices from £240.00
exc. VAT
Go to Hunza Price List

 

The Flush Floor Lite has been designed to mount flush with the level of a pathway, hotel floor or a building foyer.

The ‘Flush Fit’ lens stops water pooling and depositing dirt on the lens. There is no lip to trip over and the luminaire can be driven over or walked upon without being damaged ( maximum drive over speed 10 km/h (6 mph) and maximum vehicle weight 1500kg (3300lbs).

The square shape of The Flush Floor Lite Square makes it ideal for mounting in tiled areas. Both versions of the Flush Floor Lite have a 104mm diameter flange.

This low voltage fitting is suitable for use and supplied with a MR16 - 20 watt (max) high quality European 5000 hour lamp and it's own canister.

Click here to download Specification Sheet for Flush Floor Lite

Click here for variations    Example 1