The Lighting Site
HomeAbout UsContactTestimonialsLinksOrdering and DeliveryReturns PolicyTerms and Conditions
Retail and Exhibition LightingCommercial and Domestic LightingExterior and Garden Lighting
Hunza Step Lighting
Handcrafted in New Zealand

Discrete small fixtures reliably illuminate just where required,
making steps and stairs safe and convenient to use in low light conditions.

Step Lite Eyelid
SLE
Hunza Steplite Eyelid
CLICK TO ENLARGE

Prices from £95.00
exc. VAT
Go to Hunza Price List

Click below for application examples of the Step Lite Eyelid

Example 1

Example 2

Eyelid Step Lite eliminates all upward light.When using stairs there is no blinding glare or sparkle from the lamp to irritate the eyes.

The Step Lite Solid Eyelid flange has a smooth machined finish without mounting holes to disrupt the elegant line of the luminaire and is designed to fit into a mounting canister.

Step lighting is an important part of any exterior lighting project for both safety and aesthetic purposes. The eyelid masks two thirds of the lamp face, eliminating any upward glare.

The body is machined from 63.5 x 10mm and the flange from a solid block of aluminium 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white), or solid copper, or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used.

Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating.

The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.

Click here to download Specification Sheet for Step Lite Eyelid


Step Lite
Solid Eyelid
SLS
Hunza Steplite Solid Eyelid
CLICK TO ENLARGE

Prices from £125.00
exc. VAT
Go to Hunza Price List

Click below for application examples of the Step Lite Solid Eyelid

Example 1

Example 2

The eyelid masks two thirds of the lamp which eliminates all upward light.

Step lighting is an important part of any exterior lighting project for both safety and aesthetic purposes. The eyelid masks two thirds of the lamp face, eliminating any upward glare.

The body is machined from 63.5 x 10mm and the flange from a solid block of aluminium 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white), or solid copper, or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used.

Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating.

The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.

Click here to download Specification Sheet for Step Lite Solid Eyelid


Step Lite
Solid Eyelid Square
SLS-SQ
Hunza Step Lite Solid Eyelid Square
CLICK TO ENLARGE

Prices from £132.00
exc. VAT
Go to Hunza Price List

The eyelid masks two thirds of the lamp which eliminates all upward light.

The Step Lite Solid Eyelid Square flange has a 88mm x 88mm smooth machined square finish without mounting holes to disrupt the elegant line of the luminaire and is designed to fit into a mounting canister.

Step lighting is an important part of any exterior lighting project for both safety and aesthetic purposes. The eyelid masks two thirds of the lamp face, eliminating any upward glare..

The body is machined from 63.5 x 10mm and the flange from a solid block of aluminium 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white), or solid copper, or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used.

Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating.

The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.

Click here to download Specification Sheet for Step Lite Solid Eyelid Square


Step Lite
SL
Hunza Step Lite
CLICK TO ENLARGE

Prices from £84.00
exc. VAT
Go to Hunza Price List

Click below for application examples of the Step Lite

Example 1

Example 2

For illumination of steps and ground level horizontal lighting, for example, across driveways or exterior paved areas.

Step Lite is designed with a 88mm flange for flush mounting into masonry, stone or wood. For step lighting and ground level horizontal lighting, for example, driveway lighting or exterior paved areas. Alternatively use as a recessed up lighter!

Machined from 63.5 x 10mm thick aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, silver and white) or solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets.

The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used.

Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating.

The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.

Click here to download Specification Sheet for Step Lite


Step Lite Square
SL-SQ

Hunza Step Lite Square
CLICK TO ENLARGE

Prices from £106.00
exc. VAT
Go to Hunza Price List

For illumination of steps and ground level horizontal lighting, for example, across driveways or exterior paved areas.


Step Lite Square is designed with a 88mm x 88mm square flange for flush mounting into masonry, stone or wood. For steps lighting and ground level horizontal lighting, for example, driveway lighting or exterior paved areas. Alternatively use as a recessed up lighter!

Machined from - body 63.5 x 10mm and flange from 88mm x 88mm aluminium with a UV stable powder coated finish (standard colours bronze, green, matt black, white and silver) or solid copper or 316L stainless steel, tempered glass lens and high temperature silicon gaskets.

The standard low voltage products are suitable for use with an MR16 - 20 watt lamp and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used.

Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating.

Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.

Click here to download Specification Sheet for Step Lite Square


Step Lite Louvre
SLLU
Hunza Step Lite Louvre
CLICK TO ENLARGE

Prices from £920.00
exc. VAT
Go to Hunza Price List

Click below for application examples of the Step Lite Louvre

Example 1

When using stairs there is no blinding glare or sparkle from the 20 watt lamp to irritate the eyes.

The Step Lite Louvre has a 88mm diameter flange with a thickness of only 3mm giving this Hunza Steplighting product a 'flush to the surface' look with no protrusions. The Louvre design shades the face of the lamp, so the Step Lite Louvre is an ideal product for installing into a step-face.

The body is machined from 9mm solid copper or 316 stainless steel, it has a tempered glass lens with high temperature silicon gaskets and is supplied with a maximum 20 watt lamp.

The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used.

Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating.

The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.

Click here to download Specification Sheet for Step Lite Louvre


Step Lite Louvre
Square SLLU-SQ

Hunza Step Lite Louvre Square
CLICK TO ENLARGE

Prices from £247.00
exc. VAT
Go to Hunza Price List

When using stairs there is no blinding glare or sparkle from the 20 watt lamp to irritate the eyes.

The Step Lite Louvre Square has a 88mm square flange with a thickness of only 7mm giving this Hunza Steplighting product a 'sleek and stylish' look with no protrusions. The Louvre design shades the face of the lamp, so the Step Lite Louvre is an ideal product for installing into a step-face.
Step lighting is an important part of any exterior lighting project for both safety and aesthetic purposes
The body is machined from 9mm solid copper or 316 stainless steel, it has a tempered glass lens with high temperature silicon gaskets and is supplied with a maximum 20 watt lamp.

The standard low voltage luminaires are suitable for use with an MR16 - 20 watt lamp (max) and is supplied with a high quality European lamp. The new generation high power MR16 LED lamp can also be used.

Alternatively a 8 watt self ballasted 240 volt fluorescent option is available which offers excellent light output (comparative to a 40w incandescent lamp), low energy usage, long lamp life and very low heat generation this changes the luminaire to an IP66 rating.

The Step Lite has mounting holes as standard, but if you install using a canister there would be no need. Hunza® mounting canisters provide an efficient and professional method of installing Hunza exterior lighting luminaires. The internal O'rings also make the installed luminaires difficult to remove, therefore making them harder to steal; a priceless accessory for public installations.

.Click here to download Specification Sheet for Step Lite Louvre Square


Mouse Lite
MOUSE

Hunza Mouse Lite
CLICK TO ENLARGE

Prices from £115.00
exc. VAT
Go to Hunza Price List

The shape is pleasing to the eye and blends unobtrusively into any situation.

The Mouse Lite™ is a solid bronze or solid 316 stainless steel luminaire for surface mounting. A space in the wall behind the luminaire is not required for a cable connection due to the design which includes a cable junction cavity. There is no light directed upward or forward into the eye.

Individually cast in bronze, each luminaire has a unique finish and identity and the 316 Stainless Steel has a smooth machined finish both with frosted tempered glass lens and high temperature gasket.

Suitable for use with a G4 bi-pin lamp - 5, 10, 20 watt and is supplied with a high quality European lamp.

Click here to download Specification Sheet for Mouse Lite


Mouse Lite Square
MOUSESQ


CLICK TO ENLARGE

Prices from £172.00
exc. VAT
Go to Hunza Price List

It has a strong square shape suited to present day installations. There is no light directed upward or forward into the eye.

The Mouse Lite™ Square is a solid bronze or solid 316 stainless steel luminaire for surface mounting. It has a strong square shape suited to present day exterior lighting installations .

A space in the wall behind the luminaire is not required for a cable connection due to the design which includes a cable junction cavity.

Individually cast in bronze, each luminaire has a unique finish and identity and the 316 Stainless Steel has a smooth machined finish both with frosted tempered glass lens and high temperature gasket.

These low voltage luminaires are suitable for use with a G4 bi-pin lamp - 5, 10, 20 watt and is supplied with 20watt a high quality European lamp.

Click here to download Specification Sheet for Mouse Lite Square